Precision Enhancement in 3D Printing Technology Based on Robots

Haoyu Zhang

doi:10.54254/2755-2721/2025.GL27144

Applied and Computational EngineeringOpen access

Precision Enhancement in 3D Printing Technology Based on Robots

Research Article

Open Access

Precision Enhancement in 3D Printing Technology Based on Robots

Haoyu Zhang ^1*

¹ Hebei Vocational University of Industry and Technology

^*Corresponding author: zhanghaoyu231@stu.hbcit.edu.cn

Published on 24 September 2025

ACE Vol.186

ISSN (Print): 2755-273X

ISSN (Online): 2755-2721

ISBN (Print): 978-1-80590-383-3

ISBN (Online): 978-1-80590-384-0

Download Cover

Abstract

Robot 3D printing technology is a cutting-edge field that has developed rapidly in recent years.Using robots for 3D printing is an innovative combination of robots and 3D printing.This article elaborates on the precision enhancement of 3D printing based on robots from three aspects: the robot motion system, 3D printing technology, and 3D printing materials.This technology combines the multi-degree-of-freedom movement capability of industrial robots with the additive manufacturing principle of 3D printing, and the enhancement of its precision is of great significance for manufacturing complex components and promoting the development of high-end manufacturing.When the robotic arm performs multi-axis linkage, the cumulative error is more obvious than that of traditional 3D printers, which affects the forming quality.Poor stability, generating inertia or vibration when stopping and starting, causing the nozzle to deviate from the set position. At the same time, it is more difficult to extrude and control printing materials with high viscosity and high hardness,and the matching issues of the robot load capacity or the extrusion system also affect the printing precision.The future of 3D printing technology for robots is not only an innovation in manufacturing methods, but also a new starting point for the integration of human creativity and technology. It shows excellent application prospects in the manufacturing of complex components and provides technical support for the development of the intelligent manufacturing field.With the advancement of technology, the reduction of costs and policy support, robot 3D printing technology is expected to become a core pillar of global manufacturing.

Keywords:

Robots, 3D printing, Motor system, Printing process, Printing materials.

View PDF

References

[1]. Liu, W. (2024). Research and development of D printing system for screw extrusion robotic arm and design of printing path [Doctoral dissertation, Zhejiang Normal University].

[2]. He, X., Li, S., Rui, P., et al. (2025). Multi-joint industrial robot accuracy enhancement method research. Journal of Measurement and Control Technology, 44(5), 46–51.

[3]. Xu, H., Fang, J., Han, X., et al. (2021). Research on 3D printer control system based on robotic arm. Mechanical Engineer, (5), 9–10+14.

[4]. Zhang, Y. (2021). A multi-degree-of-freedom spatial 3D printing method and implementation based on robotic arm, Shanghai University].

[5]. Chen, X. (2025). Design and research of 3D printing film system with six-degree-of-freedom robotic arm, North Minzu University].

[6]. Toshev, R., Bengs, D., Helo, P., et al. (2024). Advancing free-form fabrication: Industrial robots' role in additive manufacturing of thermoplastics. Procedia Computer Science, 232, 3131–3140.

[7]. Xiao, S. (2022). Research and system implementation of 3D printing control synergy for multi-axis robots based on EtherCAT, Wuhan University of Technology.

[8]. Wei, Y. (2025). Research on multi-degree-of-freedom 3D printing technology for conformal electron fabrication, University of Electronic Science and Technology of China.

[9]. Gong, Y., Zhang, F., Tan, Y., et al. (2023). Adaptive hierarchical algorithm for 3D printing of multi-degree-of-freedom robotic arm based on voxel decomposition. Mechanical Design and Research, 39(4), 141–146+151.

[10]. Paduraru, E., Dumitras, G. C., Chitariu, F. D., et al. (2023). Research on additive technique parameter optimization for robotic gripper construction. Machines, 11(6).

[11]. Feng, L. (2023). Research on multi-angle process of mechanical arm direct writing 3D printing system and nozzles Jiangnan University.

[12]. Gong, Y. (2023). Research and system implementation of high-efficiency adaptive hierarchical algorithm for 3D printing of multi-degree-of-freedom robotic arm, Wuhan University of Technolog.